Application:
Wearing of gloves is recommended. nanoproofed protection chrome high-grade steel sealing takes away moisture from the skin. The application should be checked at an unobtrusive place or a sample surface. At temperatures under +5 ° C do not apply.

• Thinner: None
• Order amount: approx. 5-10 ml / m²
• Harding/drying: approx. 1-2 hours, better 24 hours
• Storage: Warehouse temperature: +5°C to +25°C, protect against direct solar radiation and frost, well closed in the original bundle camp down

Preparation:
The surface is released carefully from dirty pollutions, oil pollutions and bold pollutions. It are recommended nanoproofed protection alcohol cleaner, spirit or organic cleaners (e.g., Isopropanol, acetone). Then is it well rinsed with clear water to delete rests of Tensid.

Coating:
The coating follows through chafing or polishing up with one by nanoproofed protection chrome high-grade steel sealing moistened cloth of microfaser or cotton cloth or site foreman's cotton. The material is distributed economically{efficiently} and with rotary movements on the clean surface.

Active proof by letting drip:
Water should train on the whole surface drop, but no steady film.

Drying:
The " Easy-to-Clean " ' effect appears approx. 60 minutes after the site foreman. Should the temporary Easy-to-give the discount Clean effect, can be operated for refreshing of the effect like with the first treatment.

Leverage of the environment:
With high air humidity for the improvement of the durability wipe off the property before the coating with a cellulose cloth and little alcohol or spirit. At temperatures from more than 30 coat °C smaller surface paragraphs.

Tip:
The present application recommendation is based on extensive research projects, does not release the user, however, to check product and procedure for suitability for its special purposes independently. In particular we do not guarantee for from ourselves not expressly in written form mentioned application purposes and use kinds.