nanoproofed ® protection Varnish and rims sealing is a semi permanent, free of substances for the separation system on the basis of the chemical Nanotechnology for the care of metal and plastic surfaces. nanoproofed ® protection varnish and rims sealing lends water, oil-unfriendly and dirty-unfriendly properties to the surface, so that this is to be cleaned substantially lighter. |
|
Order amount: |
- approx. 5-10 ml / m ² (depending on subsoil)
|
|
| Application:
The processing from nanoproofed protection varnish and rims sealing intends wearing of elastic gloves. By the processing is to be provided for a good Ventilating. Ignition sources are to be kept away.
In skin contact thorough washing with water and soap is necessary. The application follows in three steps: 1. Cleaning, 2. Chafe and 3-rd drying |
|
| Cleaning:
With dirty surfaces a precleaning is necessary, for metallic surfaces we recommend nanoproofed protection precleaner. Before the application from nanoproofed ® protection varnish and rims sealing the surface must be clean and be dust free. |
|
| Chafe:
Per square meter approx. 10 are required ml, the solution is chafed with cotton or a soft cloth in rotary movements on the subsoil. |
|
| Drying:
After approx. 1 hour the coating is hardened and shows itself the water-unfriendly and dirty-unfriendly effect. With nanoproofed ® protection varnish{paintwork} and rims sealing cultivated surface can be cleaned with a moist cloth easily by new dirt; with declining effect repeat on top to described steps. |
|
Sectors of application: |
- KFZ varnish
- aluminum rims
- plastics resistant to solvent
|
|
Security tips and storage:
With room temperature at least 6 months in firmly close hard shut original bundles storable. Protect against wetness and heat.
By the processing the tips and the security council beating on the bundle are to be noticed, We point out to the fact that with the contact with chemicals the necessary safety measures are to be kept. After the use hands wash. For children keep inaccessible.
|
